Waste water

Pinch valve for abrasive, corrosive and fibrous products. Various selection for the flange and sleeve materials, makes it suitable for a variety of applications.

Pinch valve for abrasive, corrosive and fibrous products. Various selection for the flange and sleeve materials, makes it suitable for a variety of applications.

Self-regulating pressure relief valve for gas, air and steam. Direct acting.

Spring loaded flange check valve in PN40. Can be mounted both horizontally and vertically. Suitable for liquid, gas, steam, ammonia, hot oil.

Spring loaded flange check valve in PN16/40. Can be mounted both horizontally and vertically. Suitable for liquid, gas, steam, ammonia, hot oil.

HEROSE cryogenic angle safety valve with lifting device. Degreased for oxygen.

Cryo - Degreased

Angle safety valve with flange.

HEROSE top mounted standard safety valve. Many different executions available.

Flow indicator for visualization of the media.

Flow indicator for visualization of the media.

3-pcs. ball valve with ISO mounting top for mounting of actuator without use of bracket. Antistatic stem with pyramid segment. Maintenance free stuffing box. Available as control valve.

(Option: FDA - Firesafe)

EU1935 - ATEX - TA-luft - SIL3

3-pcs. premium ball valve with ISO top flange for mounting of actuator without use of bracket. Full bore. Available as control valve with V-port Type 1931.

EU1935 - ATEX - TA-luft - SIL2

Solid industrial 3-pcs. steel ball valve with BSPP thread ends ISO mounting top. 

ATEX - TA-luft - EU1935 - FDA - SIL

Solid industrial 3-pcs. stainless steel ball valve with butt weld ends and ISO mounting top. Full bore.

ATEX - TA-luft - SIL - EU1935 - FDA

Stainless steel ball valve. With locking device. Full bore.

EU1935

2-pcs. flange ball valve with ISO mounting flange. Full bore.

2-pcs. flange ball valve with ISO top flange for mounting of actuator without use of bracket. Full bore. Available as control valve with V-port ball Type 1931.

Firesafe - TA-luft - ATEX - SIL2 - EU1935 - FDA

Wafer ball valve with short face to face. Full bore

ATEX - TA-luft - FDA - EC1935 - SIL

3-way ball valve with ISO mounting top for mounting of actuator without the use of brackets. 4 seat rings to prevent any bypass behind the ball.

ATEX - FDA - EU1935

3-way ball valve with ISO mounting top for mounting of actuator without use of brackets. Patented stem construction with long lifespan. With In-line maintenance where the body can be removed from the pipe line when maintenance of the valve is needed.

ATEX - EU1935 - FDA

High performance butterfly valve.

Replaceable liner vulcanized on back-up ring. Modified ISO top.

Option: Alu-bronze disc Type E6820

CE - ATEX - 3D

Food approved wafer butterfly valve in high quality with 90° square stem.
Easy replaceable liner, peroxide hardened to retain softness at low temperatures.

EU1935 - FDA - ATEX

Food approved lug butterfly valve in high quality with 90° square stem. 
Easy replaceable liner, peroxide hardened to retain softness at low temperatures.

EU1935 - FDA - ATEX

Knife gate valve, uni-directional. Available as metallic sealing or with other kinds of seals. Stainless steel spade. Available with actuator.

Pinch valve for abrasive, corrosive and fibrous products. Various selection for the flange and sleeve materials, makes it suitable for a variety of applications.

Option: ATEX

Electrical actuator HQ-004. Compact and low weight due to high grade aluminium alloy for housing. Various output torques and usable for a wide range of voltage.

Electrical actuator HQ-015-030. Compact and low weight due to high grade aluminium alloy for housing. Various output torques and usable for a wide range of voltage.

(Option: ATEX)

Robust industrial 5/2 3/2-way solenoid valve for low temperatures and harsh outdoor/indoor environment. Namur standard for direct mounting on actuators. Surface is hard anodized as protection against corrosion. The spring affected piston ensures that the solenoid valve returns to its starting point at power failure.

SIL3

Robust industrial 5/2-way solenoid valve for low temperatures and harsh outdoor/indoor environment. Surface is hard anodized as protection against corrosion. The spring affected piston ensures that the solenoid valve returns to its starting point at power failure.

SIL3

Robust 5/2 3/2-way solenoid valve ATEX II 2 G Ex db IIC T6 Gb for low temperatures and harsh outdoor/indoor environment. Namur standard for direct mounting on actuators. Surface is hard anodized as protection against corrosion. The spring affected piston ensures that the solenoid valve returns to its starting point at power failure.

ATEX - SIL3

Compact 3/2-way solenoid valve. The spring affected piston ensures that the solenoid valve returns to its starting point at power failure.
Ideal for small single acting actuators and externally control valve.

Robust industrial 5/2-way solenoid valve for low temperatures and outdoor use. Namur standard for direct mounting on actuators. Also available as IN-LINE. Surface is hard anodized as protection against corrosion. The spring affected piston ensures that the solenoid valve returns to its starting point at power failure. 

Inductive limit switch with good visual indication of open/close. Applies to valves with various kinds of approvals. 

(Option: ATEX)

Mechanical limit stop: Solid and compact design. Quick set cam and dual cable entries. Tightness class IP67.

ATEX limit switch box: Solid and compact design. Quick set cam and dual cable entries. Different tightness classes and ATEX enclosure. Available for mechanical or inductive switches.

Intelligent positioner, compact and efficient through well-proven technology. 4-20 mA input 2-wire. Easy to use. 

CSA - (option: ATEX)

Intelligent positioner, compact and efficient through well-proven technology. 4-20 mA input 2-wire. Easy to use. 

This positioner can be used for the same valve types as Type 5410. The positioner is a good alternative price wise where no options for diagnosis or add-on cards are available.

Regulator for pressurized air with build-in filter. With or without water seperator. Reduces pressure between 0.5 - 8 bar.

Ideal for positioners.

SIL2

Various accessories for pneumatic actuators and solenoid valves.

Speed Control Valve for smooth regulation of opening and closing function of actuators.

Investment cast wafer check valve, metal seated. Spring loaded disc makes it possible to mount the valve in all directions.

Investment cast wafer check valve, soft sealing. Spring loaded disc makes it possible to mount the valve in all directions.

Wafer check valve. Light weight and small face-to-face. Easy to install and maintain.

Check valve in stainless steel with threaded ends. The valve can easily be disassembled in order to replace the internal parts.

Y-strainer in stainless steel with threaded ends. Insert in stainless steel.

Y-strainer with flanges. Stainless steel filter, mesh width from 1mm to 1.6mm.
Temp. -10°C to 300°C.

Angle safety valve with threaded ends. With or without lifting device.

Cylindrical cleaning-friendly control box in stainless steel AISI 304, for mounting on cylindrical stainless steel actuator DVC Type 5126.

This compensator has qualities such as vibration damping and absorbing movements.