Dansk Ventil Center A/S · Know-how makes the difference!
}
}
}
}
}
}
}
}
3-way
3-way ball valve (Type 1612 - T bore)
|
Material CF8M |
Dimensions 1/4" - 2" |
Connection Female |
3-way ball valve with ISO mounting top for mounting of actuator without the use of brackets. 4 seat rings to prevent any bypass behind the ball. ATEX - FDA - EU1935 |
3-way ball valve with ISO mounting top for mounting of actuator without the use of brackets. 4 seat rings to prevent any bypass behind the ball.
ATEX - FDA - EU1935
3-way ball valve (Type 1712 - L bore)
|
Material CF8M |
Dimensions 1/4" - 2" |
Connection Female |
3-way ball valve with ISO mounting top for mounting of actuator without the use of brackets. 4 seat rings to prevent any bypass behind the ball. ATEX - FDA - EU1935 |
3-way ball valve with ISO mounting top for mounting of actuator without the use of brackets. 4 seat rings to prevent any bypass behind the ball.
ATEX - FDA - EU1935
3-way ball valve (Type 1615 - T bore)
|
Material CF8M |
Dimensions DN08 - DN100 |
Connection Butt weld |
3-way ball valve with ISO mounting top for mounting of actuator without use of brackets. Patented stem construction with long lifespan. ATEX - EU1935 - FDA |
3-way ball valve with ISO mounting top for mounting of actuator without use of brackets. Patented stem construction with long lifespan.
ATEX - EU1935 - FDA
3-way ball valve (Type 1715 - L bore)
|
Material CF8M |
Dimensions DN08 - DN100 |
Connection Butt weld |
3-way ball valve with ISO mounting top for mounting of actuator without use of brackets. Patented stem construction with long lifespan. ATEX - EU1935 - FDA |
3-way ball valve with ISO mounting top for mounting of actuator without use of brackets. Patented stem construction with long lifespan.
ATEX - EU1935 - FDA
3-way ball valve (Type 1616 - T bore)
|
Material CF8M |
Dimensions DN08 - DN100 |
Connection Butt weld |
3-way ball valve T-bore similar to Type 1615 but with In-line maintenance. Here the body can be removed from the pipe line when maintenance of the valve is needed. ATEX - EU1935 - FDA |
3-way ball valve T-bore similar to Type 1615 but with In-line maintenance. Here the body can be removed from the pipe line when maintenance of the valve is needed.
ATEX - EU1935 - FDA
3-way ball valve (Type 1716 - L bore)
|
Material CF8M |
Dimensions DN08 - DN100 |
Connection Butt weld |
3-way ball valve L-bore similar to Type 1715 but with In-line maintenance, where the body can be removed from the pipe line when maintenance of the valve is needed. ATEX - EU1935 - FDA |
3-way ball valve L-bore similar to Type 1715 but with In-line maintenance, where the body can be removed from the pipe line when maintenance of the valve is needed.
ATEX - EU1935 - FDA
3-way ball valve (Type 1746)
|
Material Acid-proof stainless steel |
Dimensions 1/2'' |
Connection Thread/butt weld |
3-way change-over valve, used to connect two safety valves to a pipe system with the use of only one pipe joint. In such a case, one safety valve can be in operation while the other is under maintenance. All valves are degreased for oxygen. Cryo - Degreased |
3-way change-over valve, used to connect two safety valves to a pipe system with the use of only one pipe joint. In such a case, one safety valve can be in operation while the other is under maintenance. All valves are degreased for oxygen.
Cryo - Degreased
3-way ball valve (Type 1792)
|
Material Acid-proof stainless steel |
Dimensions 1/2'' |
Connection Butt weld |
3-way diverter valve with bottom entry and 180° turn. With welding ends and ISO top flange for direct mounting of actuator. |
3-way diverter valve with bottom entry and 180° turn. With welding ends and ISO top flange for direct mounting of actuator.
3-way brass ball valve (Type 1620 - T / 1720 - L)
On request
|
Material Brass |
Dimensions 3/8" - 2" |
Connection Female |
3-way brass ball valve with 4 seat rings to prevent any bypass behind the ball. |
3-way brass ball valve with 4 seat rings to prevent any bypass behind the ball.
3-way flange ball valve (Fig. 7281)
On request
|
Material Steel |
Dimensions DN15 - DN100 |
Connection Flange |
Solid 3-way flange ball valve in PN16/40, with ISO top flange for direct mounting of actuator. Seats in PTFE (TFM 1600) ATEX - TA-luft |
Solid 3-way flange ball valve in PN16/40, with ISO top flange for direct mounting of actuator. Seats in PTFE (TFM 1600)
ATEX - TA-luft
3-way flange ball valve (Fig. 7291)
On request
|
Material Acid-proof stainless steel |
Dimensions DN15 - DN100 |
Connection Flange |
Solid 3-way flange ball valve in PN16/40, with ISO top flange for direct mounting of actuator. Seats in PTFE (TFM 1600) TA-luft - ATEX - FDA |
Solid 3-way flange ball valve in PN16/40, with ISO top flange for direct mounting of actuator. Seats in PTFE (TFM 1600)
TA-luft - ATEX - FDA
3-way cryogenic ball valve (Type 1680)
|
Material Acid-proof stainless steel |
Dimensions 1/2" |
Connection Thread |
3-way cryogenic ball valve with temperature span from -196°C to +204°C. Suitable for nitrogen, CO2, oxygen, etc. ATEX - Cryo - Degreased |
3-way cryogenic ball valve with temperature span from -196°C to +204°C. Suitable for nitrogen, CO2, oxygen, etc.
All valves are degreased for oxygen.
ATEX - Cryo - Degreased