Dansk Ventil Center A/S · Know-how makes the difference!
Material
Steel
Acid-proof stainless steel
Dimensions
DN15 - DN100
Connection
Thread
Butt weld
SMS
V-notch ball valve with pneumatic actuator and positioner. Option - electric actuator positions.
Suitable for the regulation of gas, liquid and steam.
30°, 60° or 90° V-port.
Material
Ductile iron
Steel
Acid-proof stainless
Dimensions
DN15 - DN100
Connection
Flange
2-way control valve with pneumatic, single acting actuator and positioner - option with electric actuator and positioner. Suitable for gas, liquid and steam.
Material
Carbon steel
Stainless steel
Dimensions
DN15 - DN100
Connection
Flange
3-way bypass/mixer valve with pneumatic, single acting actuator and positioner - option with electric actuator and positioner. Suitable for gas, liquid and steam.
Material
Steel
Acid-proof stainless steel
Dimensions
DN15 - DN25
Connection
Flange
Female thread
Self-regulating pressure relief valve for gas, air and steam. Indirect acting.
Material
Acid-proof stainless
Dimensions
DN15 - DN50
Connection
Thread
Flange
Self-regulating pressure relief valve for gas, air and steam. Direct acting.
Material
Ductile iron
Dimensions
DN15 - DN100
Connection
Flange
Self-regulating pressure relief valve for gas, air and steam. Indirect acting.
Material
Steel
Acid-proof stainless
Dimensions
DN25 - DN100
Connection
Flange
Mechanical pressure relieve/bypass valve. Bellow seated valve. Setting pressure/diff. 1-4bar. PN16-PN25-PN40. Suitable for liquids and oil. Available with soft sealing.
Material
Stål
Dimensions
DN15 - DN500
Connection
Flange
Spring loaded flange check valve in PN40. Can be mounted both horizontally and vertically. Suitable for liquid, gas, steam, ammonia, hot oil.
Material
Acid-proof stainless steel
Dimensions
DN15 - DN200
Connection
Flange
Spring loaded flange check valve in PN16/40. Can be mounted both horizontally and vertically. Suitable for liquid, gas, steam, ammonia, hot oil.
Material
Brass
Stainless steel
Dimensions
1/4" - 1½"
Connection
Female
Male
HEROSE cryogenic angle safety valve with lifting device. Degreased for oxygen.
Cryo - Degreased
Material
Cast steel
Acid-proof stainless steel
Hastelloy
Dimensions
DN15 - DN200
Connection
Female
Flange
Angle safety valve with flange.
Material
Brass
Dimensions
1/4" - 2"
Connection
Female
HEROSE top mounted standard safety valve. Many different executions available.
Material
-
Dimensions
-
Connection
-
Glass and packing set for level gauge.
Material
Cast iron
Steel
Acid-proof stainless steel
Dimensions
DN15 - DN200
Connection
Flange
Flow indicator for visualization of the media.
Material
Cast iron
Steel
Acid-proof stainless steel
Dimensions
1/4" - 2"
Connection
Thread
Flow indicator for visualization of the media.
Material
Acid-proof stainless steel
Steel
Dimensions
3/8" - 4"
DN8 - DN100
Connection
Female thread
Butt weld
3-pcs. ball valve with ISO mounting top for mounting of actuator without use of bracket. Antistatic stem with pyramid segment. Maintenance free stuffing box. Available as control valve.
(Option: FDA - Firesafe)
EU1935 - ATEX - TA-luft - SIL3
Material
Acid-proof stainless steel
Steel
Dimensions
DN8 - DN100
Connection
Female thread
Butt weld
3-pcs. premium ball valve with ISO top flange for mounting of actuator without use of bracket. Full bore. Available as control valve with V-port Type 1931.
EU1935 - ATEX - TA-luft - SIL2
Material
Acid-proof stainless steel
Dimensions
1/2" - 4"
Connection
Female thread
Solid industrial 3-pcs. steel ball valve with BSPP thread ends ISO mounting top.
ATEX - TA-luft - EU1935 - FDA
Material
Acid-proof stainless steel
Dimensions
DN15 - DN80
Connection
Butt weld
Solid industrial 3-pcs. stainless steel ball valve with butt weld ends and ISO mounting top. Full bore.
ATEX - TA-luft - SIL - EU1935 - FDA
Material
CF8M
Dimensions
1/4'' - 3''
Connection
Female
Stainless steel ball valve. With locking device. Full bore.
EU1935
Material
SG-Iron
Dimensions
DN15 - DN150
Connection
Flange
2-pcs. flange ball valve with ISO mounting flange. Full bore.
Material
Acid-proof stainless
Steel
Dimensions
DN15 - DN125
Connection
Flange
2-pcs. flange ball valve with ISO top flange for mounting of actuator without use of bracket. Full bore. Available as control valve with V-port ball Type 1931.
Firesafe - TA-luft - ATEX - SIL2 - EU1935 - FDA
Material
Steel
CF8M
Dimensions
DN15 - DN150
Connection
Flange
Wafer ball valve with short face to face. Full bore
ATEX - TA-luft - FDA
Material
CF8M
Dimensions
1/4" - 2"
Connection
Female
3-way ball valve with ISO mounting top for mounting of actuator without the use of brackets. 4 seat rings to prevent any bypass behind the ball.
ATEX - FDA - EU1935
Material
CF8M
Dimensions
DN15 - DN100
Connection
Butt weld
3-way ball valve with ISO mounting top for mounting of actuator without use of brackets. Patented stem construction with long lifespan. With In-line maintenance where the body can be removed from the pipe line when maintenance of the valve is needed.
ATEX - EU1935 - FDA
Material
GGG40
Dimensions
DN40 - 600
Connection
Wafer
High performance butterfly valve.
Replaceable liner vulcanized on back-up ring. Modified ISO top
Option: Alu-bronze disc Type E6720
CE - ATEX - 3D
Material
GGG40
Dimensions
DN40 - 600
Connection
LUG
High performance butterfly valve.
Replaceable liner vulcanized on back-up ring. Modified ISO top.
Option: Alu-bronze disc Type E6820
CE - ATEX - 3D
Material
Ductile iron
Dimensions
DN50 - 600
Connection
Wafer
Food approved wafer butterfly valve in high quality with 90° square stem.
Easy replaceable liner, peroxide hardened to retain softness at low temperatures.
EU1935 - FDA - ATEX
Material
Ductile iron
Dimensions
DN50 - 300
Connection
LUG
Food approved lug butterfly valve in high quality with 90° square stem.
Easy replaceable liner, peroxide hardened to retain softness at low temperatures.
EU1935 - FDA - ATEX
Material
Ductile iron
Dimensions
DN50 - DN300
Connection
Wafer
Gas approved high performance wafer butterfly valve. Liner in gas approved NBR rubber, vulcanized on back-up ring.
Suitable for vacuum.
ATEX - DVGW - SIL
Material
Ductile iron
Dimensions
DN50 - DN300
Connection
LUG
Gas approved high performance LUG butterfly valve. Liner in gas approved NBR rubber, vulcanized on back-up ring.
Suitable for vacuum.
ATEX - DVGW - SIL
Material
Cast iron
Dimensions
DN15 - DN200
Connection
Flange
Hight quality bellow sealed globe valve.
Max. pressure: 16 bar.
Temp: -10°C to 300°C.
Suitable for steam.
Material
Steel
Dimensions
DN15 - DN200
Connection
Flange
Hight quality bellow sealed globe valve.
Max. pressure: 40 bar.
Temp: -10°C to 450°C.
Suitable for steam.
Material
Cast iron
Dimensions
DN15 - DN300
Connection
Flange
Hight quality globe valve in PN16. Suitable for steam.
Min. temp: -10°C
Max. temt. 300°C
Material
Steel
Dimensions
DN15 - DN150
Connection
Flange
Hight quality globe valve in PN16. Suitable for steam.
Min. temp: -10°C
Max. temt. 400°C
Material
Cast iron
Stainless steel
Dimensions
DN50 - DN1200
Connection
SemiLUG
Knife gate valve, uni-directional. Available as metallic sealing or with other kinds of seals. Stainless steel spade. Available with actuator.
Material
Polyestercoated aluminium
Dimensions
40Nm
Connection
ISO 5211
Electrical actuator HQ-004. Compact and low weight due to high grade aluminium alloy for housing. Various output torques and usable for a wide range of voltage.
Material
Polyestercoated aluminium
Dimensions
60Nm
Connection
ISO 5211
Electrical actuator HQ-006. Compact and low weight due to high grade aluminium alloy for housing. Various output torques and usable for a wide range of voltage.
Material
Polyestercoated aluminum
Dimensions
150Nm - 3000Nm
Connection
ISO 5211
Electrical actuator HQ-015-030. Compact and low weight due to high grade aluminium alloy for housing. Various output torques and usable for a wide range of voltage.
(Option: ATEX)
Material
Die-cast aluminium
Dimensions
-
Connection
VDI/VDE 3845 for accessories
Mechanical limit stop: Solid and compact design. Quick set cam and dual cable entries. Tightness class IP67.
Material
Die-cast aluminium
Dimensions
-
Connection
VDI/VDE 3845 for accessories
ATEX limit switch box: Solid and compact design. Quick set cam and dual cable entries. Different tightness classes and ATEX enclosure. Available for mechanical or inductive switches.
Material
Epoxy coated aluminium
Dimensions
-
Connection
-
Intelligent positioner, compact and efficient through well-proven technology. 4-20 mA input 2-wire. Easy to use.
CSA - (option: ATEX)
Material
Glass-fiber reinforces makrolon
Dimensions
-
Connection
-
Intelligent positioner, compact and efficient through well-proven technology. 4-20 mA input 2-wire. Easy to use.
Material
Aluminum
Dimensions
-
Connection
-
This positioner can be used for the same valve types as Type 5410. The positioner is a good alternative price wise where no options for diagnosis or add-on cards are available.
Material
Fiberglass
Dimensions
-
Connection
1/4" BSPP
Regulator for pressurized air with build-in filter. With or without water seperator. Reduces pressure between 0.5 - 8 bar.
Ideal for positioners.
SIL2
Material
Div.
Dimensions
-
Connection
1/8", 1/4", 1/2"
Various accessories for pneumatic actuators and solenoid valves.
Material
Anodized aluminium
Dimensions
-
Connection
Namur
Speed Control Valve for smooth regulation of opening and closing function of actuators.
Material
Acid-proof stainless steel
Dimensions
DN15 - DN100
Connection
Wafer
Investment cast wafer check valve, metal seated. Spring loaded disc makes it possible to mount the valve in all directions.
Material
Acid-proof stainless steel
Dimensions
DN25 - DN100
Connection
Wafer
Investment cast wafer check valve, soft sealing. Spring loaded disc makes it possible to mount the valve in all directions.
Material
Acid-proof stainless steel
Dimensions
1/2" - 1"
Connection
Female
Y-strainer in stainless steel with threaded ends. Insert in stainless steel.
Material
AISI 316
Dimensions
1/2" - 2"
Connection
Female, Male
Angle safety valve with threaded ends. With or without lifting device.
Material
Carbon steel
Dimensions
-
Connection
Ø16 mm
PN40 transparent level gauge with EN10204/3.1. certificate. Every gauge has two flat transparent glasses. Is equiped with a diffused light illuminator placed on the back side of the gauge.
Material
Carbon steel
Dimensions
-
Connection
Ø16 mm
PN25 reflection level gauge with EN10204/3.1. certificate.
Material
Carbon steel
Dimensions
-
Connection
DN20, DN25
PN40 cock gauge are connected to gauge applicable for water, steam and non abrasive media.
Material
Zinc plated steel flanges
Dimensions
DN25 - DN300
Connection
Flange
This compensator has qualities such as vibration damping and absorbing movements.